If you have low water pressure in your shower, it may be due to a flow restrictor. Flow restrictors are devices that limit the amount of water that comes out of a shower head. Most shower heads have these devices installed in them to help conserve water. However, if you find that your shower has low water pressure, you may need to remove the flow restrictor. This can be done easily with a few tools.
Instructions
1. Turn off the water to your shower. This can usually be done by turning the knob at the base of the showerhead.
2. Unscrew the shower head from the pipe. You may need to use a wrench to do this.
3. Look for the flow restrictor inside the shower head. It will be a small disc or screen.
4. Remove the flow restrictor and clean it off. You can use a toothbrush or other small brush to do this.
5. Put the flow restrictor back in the shower head and screw it back onto the pipe.
6. Turn on the water to your shower and test the water pressure. If it is still low, you may need to replace the flow restrictor.
Tips & warnings
Some shower heads have the flow restrictor built into them and cannot be removed. If your shower head has a removable flow restrictor, it is usually located near the base of the shower head.
If you have low water pressure in your shower, it may be due to a variety of factors. Check all of the fixtures in your shower to see if they are working properly before removing the flow restrictor.
If you have hard water, mineral deposits can build up on the flow restrictor and cause low water pressure. Soak the flow restrictor in vinegar overnight to remove any deposits.
Be careful not to overtighten the shower head when screwing it back onto the pipe. This can damage the threads and make it difficult to remove the shower head in the future.
If you are still having problems with low water pressure after removing the flow restrictor, you may need to call a plumber.
Moen shower head flow restrictor
1. Turn off the water to your shower. This can usually be done by turning the knob at the base of the showerhead.
2. Unscrew the shower head from the pipe. You may need to use a wrench to do this.
3. Look for the flow restrictor inside the shower head. It will be a small disc or screen.
4. Remove the flow restrictor and clean it off. You can use a toothbrush or other small brush to do this.
5. Put the flow restrictor back in the shower head and screw it back onto the pipe.
6. Turn on the water to your shower and test the water pressure. If it is still low, you may need to replace the flow restrictor.
Delta shower head flow restrictor removal
1. Turn off the water to your shower. This can usually be done by turning the knob at the base of the showerhead.
2. Unscrew the shower head from the pipe. You may need to use a wrench to
The flow restrictor in a Moen shower head is located at the base of the shower head. It is a small disc that can be removed with a screwdriver.
To remove the flow restrictor:
1. Unscrew the cap at the base of the shower head.
2. Remove the O-ring and washer from the shower head.
3. Use a small screwdriver or other tool to remove the flow restrictor from the shower head.
4. Clean off any mineral deposits from the flow restrictor and replace it in the shower head.
5. Screw the cap back onto the shower head and turn on the water. Test the water pressure to see if it has improved.
If you are still having problems with low water pressure, you may need to call a plumber.
Tips & warnings
Some shower heads have the flow restrictor built into them and cannot be removed. If your shower head has a removable flow restrictor, it is usually located near the base of the shower head. If you have low water pressure in your shower, it may be due to a variety of factors. Check all of the fixtures in your shower to see if they are working properly before removing the flow restrictor.
If you have hard water, mineral deposits can build up on the flow restrictor and cause low water pressure. Soak the flow restrictor in vinegar overnight to remove any deposits.
About The Author
